Professional Appliance Repairs

So often, when we think about having a broken appliance fixed, we frame the problem in terms of convenience: malfunctioning dryers make us hang dry the laundry or spend the time and effort visiting the laundromat across town; inoperative ovens mean the cost of takeout or frozen meals; faulty dishwashers lead to hours spent hand washing plates and pots. But the truth is, when one of your household appliances is acting up, it isn’t just an issue of convenience. In many cases, it can also be a matter of safety.

Some appliance malfunctions can be perfectly benign stove and oven repair pasadena. Others can put your family and your home at risk. For the average homeowner or amateur, telling the difference can be difficult, so as a rule of thumb, you’ll always want to call a professional appliance repair company if you suspect your stove, dryer, or other household appliance is creating a danger in your home. The following are just some of the many ways in which appliances that are on the fritz can be dangerous:

Dryers

The National Fire Data Center reports that in 2007 approximately 15,600 house fires were started by clothes dryers. The majority of these fires can be attributed to dryer vents clogged with lint. Incidentally, one of the most noticeable signs that your dryer vent needs to be cleaned is decreased drying ability. If clothes are coming out of the dryer damp after a normal timed cycle, if the “more dry” setting results in your dryer running longer and longer to handle the same volume of clothes, or if you’ve noticed that your dryer just doesn’t seem to be working efficiently, stop using your dryer right away. The problem may not end up being a blocked vent, but you won’t know for sure until after you’ve called for dryer appliance repairs. The risk of fire–and its danger to your home and your family–just isn’t worth it.

Ovens, Stoves, and Cooktops

The U.S. Fire Administration reports that cooking appliances are the leading cause of both home fires and home fire injuries in this country. While many of these fires are started as a result of unattended cooking or flammable objects left on a hot surface, others can be caused by malfunctioning appliances themselves. Stoves and ovens that are deteriorated or damaged can heat up on the outside, spark, and even heat uncontrollably. Any one of these behaviors could result in burns as well as fire hazards, so if your cooking appliance is acting up, be sure to call for oven repair ASAP.

And of course, with any gas appliance, there is always the chance that a leak may be the problem. Gas leaks are obviously extremely dangerous, and attempting DIY gas dryer repair or oven service tends to create additional issues, so any time a performance flaw crops up with a gas appliance, your best bet is to call in an appliance repair technician for immediate service. This keeps any health and safety hazards to an absolute minimum.

Maintenance for Appliances

Preventative maintenance for your humidifier starts with the filter, or pad. Once water is evaporated through the filter or pad, they often get clogged with lime, calcium, and other sorts of deposits. This buildup is very difficult to remove and it also can decrease the efficiency. Most humidifiers are only capable of evaporating at half the rate once the filter is clogged up. So be sure to change the filter/pad once every six months. If you have a reservoir type humidifier, be sure to clean the float assembly once every six months to stop overfilling. If you have a flow-through style humidifier, check the drain to make sure there is proper water flow.

Preventative maintenance for your microwave starts with the inside of the appliance. Be sure to clean the inside of your microwave often, and wipe up spills right away. Food matter and spills can actually absorb some of the microwave’s energy while it is running. This can cause burns and other damage to your microwave. Use a warm soapy rag or sponge to wipe up spills, and dry the inside of the microwave with a dry cloth or paper towel. Also, since microwaves are susceptible to damage from voltage spikes, it’s a good idea to use a surge protector to help protect your microwave’s circuitry kitchenaid stove and oven repair los angeles.

Preventative maintenance for your dryer starts with cleaning out the lint. Lint buildup is the number one cause of dryer failures and fires. This not only is a safety hazard, but it can also reduce the efficiency of your dryer by causing the drying time to increase greatly. You can use a type of vent brush that is specifically made to remove lint buildup from the vent that leads outside. If your dryer vent is made out of white vinyl, it is a good idea to replace it with an aluminum vent because the white vinyl ducts no longer meet building codes and they also are flammable.

Preventative maintenance for your washer should begin with the hoses. Inspect your washer’s fill hoses once every six months. The signs to look out for are cracks, bumps, blisters, leaks, and corroded fittings. Cracks in the hoses are a sign of aging and it means the rubber is starting to break down. Blisters and bumps can mean that the inner lining of the hose is ruptured, and the hose could burst. Corroding means that the hose used to leak or is leaking. If you don’t replace the hoses you could find that the corroded fitting is almost impossible to remove from the faucet. Replace your washer hoses if they have any of the above mentioned conditions. Usually your washer’s hoses should be replaced every three to five years to ensure that they don’t cause a leak. You should also check to make sure your washer is level on the floor. The number one cause of washer failure and complaints is that the washer bounces around. Make sure you never overload your clothes washer, this can cause the washer to become unbalanced and also it causes unnecessary strain on your washer.

Preventative maintenance for your range starts with the knobs. If you can no longer read the lettering/numbering on the knobs it is time to replace them. Cleaning the knobs with a non-abrasive cleaner will help to keep the lettering on longer. You should clean the control panel with glass cleaner, or cleaners that are made specifically for the control panel. Make sure to never use aluminum foil to cover your drip pans, this can cause a short circuit at the burner. So just clean the drip pans with a household non-abrasive cleaner. If they cannot be cleaned, you can usually replace them for a reasonable price. Make sure to clean up spills in the oven as soon as possible, otherwise they can be stubborn to remove once they are baked onto the oven surface.

Preventative maintenance for your dishwasher starts once you notice your dishes not getting clean. This can be caused by not enough water coming into the appliance, which is caused by a broken or worn out water inlet valve. If you are a do-it-yourselfer, you can easily do this repair. It takes an adjustable wrench, a Phillips screwdriver, and some adjustable pliers. If you don’t use your dishwasher for more than a week at a time it’s a good idea to use some dishwasher cleaner and clean the inside to prevent mold and a stinky dishwasher. You can repair broken and rusty dishwasher racks by using a dishwasher repair kit which includes tine caps and special paint. Clean your dishwasher filter regularly, read your owner’s manual to figure out where your filter is located and for how to remove and clean it. Replace your filter if it is damaged. Clean out the spray arms as well, the small holes in the spray arms over time can become clogged with food bits and other debris. If you notice any glass in the spray arm, there is probably glass in the pump housing too, so you should disassemble the pump to check and clean it.

Preventative maintenance for your automatic defrost refrigerator/freezer should begin with cleaning the coils. This should be done at least once every six months (or more if you have pets). The coils are underneath the refrigerator, they are usually black and look like a series of fins and tubes. You can use a brush specifically made for that job to make it easier. Next, check the door seals to ensure they are sealing properly. Loose door seals are one of the leading causes of your refrigerator running ineffectively. If you notice any tears, cracks, or bumps, you should replace your door seals. Clean out the seals every six months with warm soapy water so they don’t stick to the frame. Check the back wall of the freezer for frost build up, if you do notice any buildup it is a sign that the self-defrosting system has an issue.

Dryer Taking Too Long to Dry Clothes

Clothes dryer is taking a long time to dry clothes? The difference between gas and electric dryers is the way in which the heat is generated. In an electric dryer, AC current flows through a low resistance coil network causing high current flow through the wire coils. Because of the low resistance heater coil, current flow is high so it generates heat. Air from the internal dryer ducting flows through these wire coils to heat the air and a blower wheel, usually attached to the drum motor, pulls the heated air through the dryer drum.

If you look closely in the dryer drum you will see an inlet and an outlet maytag dryer repair pasadena. The intake is usually at the rear of the inside of the drum, commonly described as looking like a cheese grate. This is where your heat comes from. Well, if you have heat coming in, you have to have heat leaving the drum. The heat duct outlet is located either on the inside next to the intake or on the front of the machine at the lint filter. If the outlet is on the inside rear, you’ll see the lint filter located on top panel of the dryer. If your outlet is on the inside front, you’ll see the lint filter in the same location

In a properly working dryer, electric or gas, you will have heated air coming into the drum and you will have one addition to the heated air that leaves the drum – MOISTURE. The heated air from the heat source blends with your clothes and creates moisture in the air. This moisture MUST escape the drum for your clothes to dry properly. I can guess what you’re thinking at this point – “but I always clean the lint filter.” Yes, most of my customers diligently clean their lint filter but ask yourself this – When was the last time you had a professional vent-cleaning company come in to clean your dryer vent? I don’t mean that flexible venting behind your dryer. I mean the vent that goes from the wall behind your dryer that extends to the outside wall or roof of your house. These should be cleaned AT LEAST every 5 years.

Here are some typical problems a clogged or obstructed vent will cause: Blown heater element – coils overheat from low air-flow causing overheat condition which reduces the lifetime of the element. Blown high-limit thermostat and thermal fuse – caused by an overheat condition. If your dryer is still heating properly but not drying clothes than you are in luck, you still can prevent damage to your dryer and avoid a costly repair. Most dryer-repair calls I make are directly related to a restricted or clogged dryer vent.

In conclusion, if your dryer is showing signs of overheat conditions mentioned in this article, call a dryer vent cleaning service – before you call an appliance repair service, Get that vent thoroughly cleaned from the inside wall all the way to the outside dryer vent. If you don’t see an improvement in drying, than call a repairman. Typically, a dryer vent cleaning service should charge between one hundred and a hundred and fifty dollars max.

Three Easy Dishwasher Repair Tips You Can Do Yourself

When a dishwasher quits working or does not work properly, there is panic in the house. The thought of having to do that mountain of dishes by hand makes a housewife or househusband’s blood run cold. Three easy dishwasher repair tips are: check to see that the dishwasher is plugged in, check the use and care manual that came with the dishwasher, and do research in a repair manual from the library or on the Internet.

The first step is to make sure the appliance is plugged properly into the electrical outlet. You wouldn’t believe how many times this is the problem, as simple as it may seem. The second step is to make sure the electrical outlet has electricity. This can be done by plugging another appliance into the outlet, like a handheld electric mixer whirlpool dishwasher repair los angeles.

If there is power to the outlet and the dishwasher does not work, the wiring on the dishwasher should be checked for breaks or burn spots. If there is no power to this source, the electrical panel needs to be checked to make sure that the breaker is turned on or a fuse isn’t blown. An electrical problem may require the services of an electrician.

The appliance users guide has troubleshooting tips that cover common problems. These include normal problems like noise, water standing in the bottom of the tub, water not pumping out, dishes aren’t drying or are not getting clean, and problems with the soap dispenser.

Many times simple repairs suggested in the user’s guide will solve the problem. If the problem involves insufficient or no water, the water valve to the dishwasher needs to be checked to make sure it is turned on and has water.

If the problem has not been resolved, the homeowner can get a repair manual from the library or do research online. At this point, the unit will probably have to be disassembled to repair the problem. A simple issue would be a repair to the door of this dishwasher. A more complicated problem will require removing the appliance from its current location to reach the necessary areas that might need repair.

Once a probable cause has been determined, a part or parts will probably have to be ordered. This requires a payment and a delay while waiting for the part. Once the part or parts arrive, all the manual dishwashers will gather around to offer encouragement and suggestions; this may not be a pleasant experience for the new maintenance person.

A professional repairman will have the tools and the knowledge to handle the repair in a short time. Most of the time no money will be spent until the dishwasher is working again. For the do-it-yourselfer who is successful, repairing a dishwasher is a rewarding experience.

Dryer Taking Too Long to Dry Clothes

Clothes dryer is taking a long time to dry clothes? The difference between gas and electric dryers is the way in which the heat is generated. In an electric dryer, AC current flows through a low resistance coil network causing high current flow through the wire coils. Because of the low resistance heater coil, current flow is high so it generates heat. Air from the internal dryer ducting flows through these wire coils to heat the air and a blower wheel, usually attached to the drum motor, pulls the heated air through the dryer drum.

If you look closely in the dryer drum you will see an inlet and an outlet lg dryer repair pasadena. The intake is usually at the rear of the inside of the drum, commonly described as looking like a cheese grate. This is where your heat comes from. Well, if you have heat coming in, you have to have heat leaving the drum. The heat duct outlet is located either on the inside next to the intake or on the front of the machine at the lint filter. If the outlet is on the inside rear, you’ll see the lint filter located on top panel of the dryer. If your outlet is on the inside front, you’ll see the lint filter in the same location

In a properly working dryer, electric or gas, you will have heated air coming into the drum and you will have one addition to the heated air that leaves the drum – MOISTURE. The heated air from the heat source blends with your clothes and creates moisture in the air. This moisture MUST escape the drum for your clothes to dry properly. I can guess what you’re thinking at this point – “but I always clean the lint filter.” Yes, most of my customers diligently clean their lint filter but ask yourself this – When was the last time you had a professional vent-cleaning company come in to clean your dryer vent? I don’t mean that flexible venting behind your dryer. I mean the vent that goes from the wall behind your dryer that extends to the outside wall or roof of your house. These should be cleaned AT LEAST every 5 years.

Here are some typical problems a clogged or obstructed vent will cause: Blown heater element – coils overheat from low air-flow causing overheat condition which reduces the lifetime of the element. Blown high-limit thermostat and thermal fuse – caused by an overheat condition. If your dryer is still heating properly but not drying clothes than you are in luck, you still can prevent damage to your dryer and avoid a costly repair. Most dryer-repair calls I make are directly related to a restricted or clogged dryer vent.

In conclusion, if your dryer is showing signs of overheat conditions mentioned in this article, call a dryer vent cleaning service – before you call an appliance repair service, Get that vent thoroughly cleaned from the inside wall all the way to the outside dryer vent. If you don’t see an improvement in drying, than call a repairman. Typically, a dryer vent cleaning service should charge between one hundred and a hundred and fifty dollars max.

 

5 Things to Check When Your Dryer Won’t Work

Having a washing machine and clothes dryer in your home is a luxury. Rather than having to load up all your dirty linens and clothes then spend hours at the laundry mat, you can simply do a load (or more, if you’re like most of us) of clothing whenever it is necessary. Of course, like many modern day conveniences, these appliances are only great if they are working. However, when it comes to your dryer, there are several things you can do to see if you can determine the cause of the problem. Consider these 5 potential problems of dryers.

The dryer will not turn on-Make sure the dryer is plugged in. While it sounds simple, it is more common than one would like to imagine. In fact, if you talk to repair personnel or customers service reps for nearly every household item, they will tell you that they get calls daily from customers who say their purchase won’t work only to discover that it was because the item was not plugged in samsung dryer repair pasadena!
Check the fuse box-Sometime the dryer is plugged in, but the circuit breaker has been tripped. If this becomes something you have to correct on a regular basis, call in a repairman to determine what is causing the problem.
The clothes are taking a long time to dry-Often this is caused because the lint tray needs to be cleaned. The tray should be cleaned before (or after) every load of clothes. Not only will this help the clothes to dry quicker, but it will reduce the risk of the machine getting too hot and possibly causing a fire. Along with cleaning the lint tray, you should use the vacuum cleaner hose to clean between the vent and the dryer drum and vacuum/dust the area behind the dryer at least once a month. This will also lower the risk of fire.
The lint tray and surrounding areas are clean, but it is still taking a long time for clothes to dry- Check the outside air vent and make sure that it is open. If it is closed you will need to open it up and clean it out using a long handled brush. You will also want to check the tubing that moves the air from the dryer to the outside- if the tubing gets crimped or squeezed this, too, can add time to your drying process.

The way to Save Huge by Hiring an Equipment Professional for Your Dishwasher Restore

It might appear counterintuitive to say that hiring a serious equipment restore skilled for dishwasher help is a budget-conscious transfer, however a restore professional can really prevent a whole lot of . Discover out why it’s best to name in an professional the subsequent time you want a dishwasher restore in your kitchen.

Dishwashers are machines and machines break samsung dishwasher repair pasadena. That is the onerous reality. Sooner or later you’ll need a dishwasher rack restore or a brand new heating component, and you will must name in a professional to make that occur. For many people, making that decision can really feel just like the kiss of loss of life. All we are able to take into consideration are the large restore payments, the hours of inconvenience as a restore individual takes over our kitchen, and a nagging hunch that any equipment professional we let by the door will discover much more issues incorrect than we knew about within the first place. These are all very scary ideas. Nevertheless, whenever you cease to really contemplate the scenario, it turns into obvious dishwasher professional may be your key to main financial savings by way of each money and time. Learn on to learn the way your native equipment professional can play the position of the superhero fairly than the tremendous villain in your dishwasher drama.

Let’s first deal with the concept that the restore invoice for dishwasher service will likely be large. If there’s a main downside together with your dishwasher then sure, the restore invoice may finish in a quantity that makes your coronary heart skip a beat (and never in a great way). Nobody plans for his or her dishwasher to begin inexplicably leaking or not draining, and even probably the most budget-savvy house owner will likely be hard-pressed to have cash put aside for all equipment repairs that come up. Nevertheless, contemplate this: the price of getting equipment repairs completed whenever you want them signifies that your equipment will likely be in good well being for the foreseeable future.

Examine the price of changing a broken water inlet or drain valve with the price of shopping for and putting in a brand new dishwasher. There is a massive distinction. It is true that getting a restore completed may be expensive and might throw your month-to-month finances into cardiac arrest. Nevertheless, coping with a solvable downside when it comes up is significantly better than ignoring it and having to purchase an entire new machine down the road. You may need to spend some cash that you simply did not plan on spending within the second, however you will save far more cash in the long term.

This similar logic applies to the inconvenience of getting a restore professional in your kitchen whereas they do diagnostic and restore work. Sure, having them there may throw your routine out of whack. However, is it higher to have them current for a couple of hours and get no matter downside you are having solved, or is it higher to instantly have your dishwasher stop working proper in the midst of doing the Thanksgiving dinner dishes? It is higher to bear a bit of bother within the current than to courtroom catastrophe down the street.

The identical holds true in the case of accepting extra diagnoses for a troubled machine. Within the midst of bracing your self for an enormous invoice and making an attempt to get dinner prepared whereas staying out of the dishwasher restore professional’s manner, you don’t want to listen to that there are extra dishwasher repairs on the horizon. Nevertheless, is not it higher to know what all the issues are so to repair them as a substitute of getting one thing crop up as a shock afterward? Catching issues early additionally usually signifies that they are not as critical (or costly to repair) as they may very well be sooner or later. Chances are you’ll not need to hear any extra dangerous information, however that is one case wherein realizing is healthier than being in the dead of night.

When you must name in an equipment restore professional for dishwasher assist, do not consider it as a burden. These consultants can really make your life lots inexpensive and fewer aggravating in the long term.

Refrigerator Repair

Is your refrigerator keeping you up at night with its various moans and groans? When you need immediate relief from your noisy refrigerator, there are a few steps you can take. Follow these helpful tips from your local appliance repair shop:

Locate the source of the noise – Is the noise coming from the inside of the freezer, or the outside back of the refrigerator? Determining what area the noise is coming from will help you narrow down the possible components that might be causing the sound kenmore refrigerator repair altadena.

Troubleshoot – There are only a handful of parts in a refrigerator that typically cause noise. Once you have narrowed down the general location of the sound, you can begin troubleshooting various components to try to resolve the issue. While some issues can easily be fixed with minimal effort, others will require that you call in a professional who is trained in refrigeration repair.
Noise Inside the Freezer

Noise originating inside the freezer can typically be attributed to the evaporator fan, which runs whenever the unit is actively cooling. If you notice a chirping, squealing, or groaning sound that comes and goes (rather than being steady), it may be an issue with the fan motor. To find out for sure, open the freezer door and hold down the light/fan switch if there is one. If the sound gets louder with the door open, you can be pretty sure that the fan is the cause. Unfortunately, there is no way to repair the evaporator fan motor–you must replace the part in order to resolve the issue.

Noise from the Back of the Refrigerator

Most noises that you notice will come from the back of the refrigerator, where most of the moving parts are located. If you have a self-defrosting unit, the first place you will want to check is the condenser fan. The condenser fan is located on the back of the refrigerator, often behind a thin panel. The fan can occasionally accumulate a buildup of lint and other debris, causing a buzzing or clicking noise. You can try to resolve the problem by removing the thin cover to access the fan, and then cleaning the fan of any debris using a soft bristled brush (old toothbrushes are great for this!). Once the fan is clear of dust or other materials, replace the cover and plug the refrigerator back in. If you still have noise coming from the condenser fan after cleaning it, you may have to replace the part with the help of an appliance repair company.

If your refrigerator is making a rumbling, or purring noise from the back, it may indicate a problem with your compressor. The compressor is located in a football-sized case on the back of the refrigerator, near the bottom of the unit, and usually contains either black or copper tubes with a variety of colored wires. The compressor is typically a sealed unit, so it can not be replaced by a do-it-yourselfer. If you are able to isolate the problem to the compressor, you will need to contact a refrigerator repair technician to complete the job.

Noise from the Bottom of the Refrigerator

If you have noise emanating from the bottom of your refrigerator, it is likely coming from one of two places. The first, and easiest to resolve, is rattling from a loose drain pan. To fix this issue, simply tape the pan securely in place to stop the noise. If that doesn’t work, you may have an issue with the defrost timer. The defrost timer is located in the front of the unit, behind the kickplate. This part is actually a heating element located on the evaporator coil and can not be repaired. If you are experiencing trouble with the defrost timer, you may also notice a buildup of frost in your refrigerator or freezer. To have this component replaced, you should contact an experienced professional for installation of the refrigerator repair part.

When to Contact the Professionals

If you complete the above steps and still can’t determine where the problem is coming from, or if you need to replace a complicated part such as the compressor or defrost timer, you should contact your
local appliance repair service. In addition to providing you with thorough troubleshooting and safe, reliable repairs, most refrigerator repair technicians also offer routine maintenance, which can help you avoid problems down the road. With their help, you’ll be able to sleep soundly without being interrupted by strange kitchen noises well into the future.

Need Help For Your Refrigerator Repair?

When you make your purchase for a Sub Zero refrigerator, you are guaranteed that it is free of technical defects due to stringent quality checks by reliable technicians during the manufacturing process. However, sometimes there could be one or two refrigerators out of a thousand refrigerators which are faulty. Circumstances like so are unavoidable yet Sub Zero Company strives to ensure that all the refrigerators produced are of the best quality to ensure your satisfaction.

Technical defects could occur in the initial stage of operation by the refrigerator. For example, the fridge could not be turned on or is not working the way a fridge is supposed to work when the deliveryman delivers the fridge to your house. Should this unfortunate situation arise, simply just fill in the return form and send the fridge back to us. A new Sub Zero refrigerator will be delivered to you as soon as possible maytag refrigerator repair pasadena.

However, some technical defects could arise after a few months or years after operation. As you are made aware, Sub Zero refrigerators pride on its reliability and long lasting operation. So if you find the refrigerator not functioning as it claims, please contact the Sub Zero refrigerator repair department and we shall arrange for a technician to troubleshoot the problem.

If possible, should a problem arise please do troubleshoot the problem according to the customer’s manual provided to you when your purchased the Sub Zero refrigerator as some of the problems could be easily troubleshoot by you. Only when you are left with no choice, then Sub Zero refrigerator repair technicians are ever ready to be at your service.

Do also check whether your refrigerator is within the warranty period. If your fridge is still within the warranty period, then all expenses incurred during the repair will be provided as a courtesy from Sub Zero Company. However if it is not within the warranty period, then repair fees shall be borne by the user.

The History of Residential and Commercial Refrigeration

Refrigeration; we take it for granted. Industry upon industry remains reliant upon the safe travel and storage of certain goods to offer a quality product, or even function properly. Look at that Kobe beef steak on your plate; would that have made it to the US and onto your plate if left unrefrigerated by hospitality grade equipment on every step of the journey? Don’t think so.

Commercial refrigeration services have grown by leaps and bounds in just a short amount of time. Both residential and commercial refrigeration repair, installations are multi-million dollar industries that are utilized throughout the world in hospitality, food and beverage, climate control, and many other industries. But, did you know that just decades ago, commercial and (especially) residential refrigeration was unheard of ge refrigerator repair pasadena
?

Making Ice
As far back as the early 20th century, there was no method to create ice cost-effectively for residential or commercial purpose. The most common way of stocking up on ice was through actually HARVESTING it. A crew would go out during cold weather and cut/transport huge sums of natural ice. Typically, a larger crew of around 75 men could come home with 1,500 tons of ice on a daily basis. The ice was hauled to huge ice houses; heavily insulated storerooms to hold and preserve the ice, year round.

The Iceman Cometh
And how was that ice delivered to residences and businesses throughout a town? There used to be a select profession, which would get up early during the summer and deliver measured, cut blocks of winter-harvested ice around town. This was achieved via insulated wagon, cart, or truck. Just as a milkman used to deliver fresh milk, the iceman delivered cold blocks of ice for storage in an icebox. This enabled residents and business to store and keep perishable goods, sending the services industries ahead by leaps and bounds and greatly enhancing capability to keep foods and goods fresh.

The Modern Refrigerator
Modern refrigeration units, built from the concept of the 1869 “Compression Ice Box,” were not commercially available for residential use until around 1911. Refrigeration itself began a commercial use push in the later 19th century (especially by breweries), but not without the growing pains regarding cost. However, methods of freezing certain gases into a liquid state in 1876 became the basis for large scale commercial refrigeration designs.

In the early 19th century, due in part to pollution and contamination permeating the ice cutting industry, just about every beef and meat warehouse was outfitted for commercial refrigeration. Commercial refrigeration repair blossomed using the same methods until around 1920, when newer, less harmful refrigerants were discovered and employed.

Today, commercial refrigeration repair and installations have reaped the benefits of years of refinement. Using green energy initiatives, minimal resource consumption, and sustainable refrigerants, commercial and residential refrigeration have grown from simple luxuries and amenities, to full-on utilities that must be protected through commercial refrigeration repair for continued use.