Professional Appliance Repairs

So often, when we think about having a broken appliance fixed, we frame the problem in terms of convenience: malfunctioning dryers make us hang dry the laundry or spend the time and effort visiting the laundromat across town; inoperative ovens mean the cost of takeout or frozen meals; faulty dishwashers lead to hours spent hand washing plates and pots. But the truth is, when one of your household appliances is acting up, it isn’t just an issue of convenience. In many cases, it can also be a matter of safety.

Some appliance malfunctions can be perfectly benign stove and oven repair pasadena. Others can put your family and your home at risk. For the average homeowner or amateur, telling the difference can be difficult, so as a rule of thumb, you’ll always want to call a professional appliance repair company if you suspect your stove, dryer, or other household appliance is creating a danger in your home. The following are just some of the many ways in which appliances that are on the fritz can be dangerous:

Dryers

The National Fire Data Center reports that in 2007 approximately 15,600 house fires were started by clothes dryers. The majority of these fires can be attributed to dryer vents clogged with lint. Incidentally, one of the most noticeable signs that your dryer vent needs to be cleaned is decreased drying ability. If clothes are coming out of the dryer damp after a normal timed cycle, if the “more dry” setting results in your dryer running longer and longer to handle the same volume of clothes, or if you’ve noticed that your dryer just doesn’t seem to be working efficiently, stop using your dryer right away. The problem may not end up being a blocked vent, but you won’t know for sure until after you’ve called for dryer appliance repairs. The risk of fire–and its danger to your home and your family–just isn’t worth it.

Ovens, Stoves, and Cooktops

The U.S. Fire Administration reports that cooking appliances are the leading cause of both home fires and home fire injuries in this country. While many of these fires are started as a result of unattended cooking or flammable objects left on a hot surface, others can be caused by malfunctioning appliances themselves. Stoves and ovens that are deteriorated or damaged can heat up on the outside, spark, and even heat uncontrollably. Any one of these behaviors could result in burns as well as fire hazards, so if your cooking appliance is acting up, be sure to call for oven repair ASAP.

And of course, with any gas appliance, there is always the chance that a leak may be the problem. Gas leaks are obviously extremely dangerous, and attempting DIY gas dryer repair or oven service tends to create additional issues, so any time a performance flaw crops up with a gas appliance, your best bet is to call in an appliance repair technician for immediate service. This keeps any health and safety hazards to an absolute minimum.

Maintenance for Appliances

Preventative maintenance for your humidifier starts with the filter, or pad. Once water is evaporated through the filter or pad, they often get clogged with lime, calcium, and other sorts of deposits. This buildup is very difficult to remove and it also can decrease the efficiency. Most humidifiers are only capable of evaporating at half the rate once the filter is clogged up. So be sure to change the filter/pad once every six months. If you have a reservoir type humidifier, be sure to clean the float assembly once every six months to stop overfilling. If you have a flow-through style humidifier, check the drain to make sure there is proper water flow.

Preventative maintenance for your microwave starts with the inside of the appliance. Be sure to clean the inside of your microwave often, and wipe up spills right away. Food matter and spills can actually absorb some of the microwave’s energy while it is running. This can cause burns and other damage to your microwave. Use a warm soapy rag or sponge to wipe up spills, and dry the inside of the microwave with a dry cloth or paper towel. Also, since microwaves are susceptible to damage from voltage spikes, it’s a good idea to use a surge protector to help protect your microwave’s circuitry kitchenaid stove and oven repair los angeles.

Preventative maintenance for your dryer starts with cleaning out the lint. Lint buildup is the number one cause of dryer failures and fires. This not only is a safety hazard, but it can also reduce the efficiency of your dryer by causing the drying time to increase greatly. You can use a type of vent brush that is specifically made to remove lint buildup from the vent that leads outside. If your dryer vent is made out of white vinyl, it is a good idea to replace it with an aluminum vent because the white vinyl ducts no longer meet building codes and they also are flammable.

Preventative maintenance for your washer should begin with the hoses. Inspect your washer’s fill hoses once every six months. The signs to look out for are cracks, bumps, blisters, leaks, and corroded fittings. Cracks in the hoses are a sign of aging and it means the rubber is starting to break down. Blisters and bumps can mean that the inner lining of the hose is ruptured, and the hose could burst. Corroding means that the hose used to leak or is leaking. If you don’t replace the hoses you could find that the corroded fitting is almost impossible to remove from the faucet. Replace your washer hoses if they have any of the above mentioned conditions. Usually your washer’s hoses should be replaced every three to five years to ensure that they don’t cause a leak. You should also check to make sure your washer is level on the floor. The number one cause of washer failure and complaints is that the washer bounces around. Make sure you never overload your clothes washer, this can cause the washer to become unbalanced and also it causes unnecessary strain on your washer.

Preventative maintenance for your range starts with the knobs. If you can no longer read the lettering/numbering on the knobs it is time to replace them. Cleaning the knobs with a non-abrasive cleaner will help to keep the lettering on longer. You should clean the control panel with glass cleaner, or cleaners that are made specifically for the control panel. Make sure to never use aluminum foil to cover your drip pans, this can cause a short circuit at the burner. So just clean the drip pans with a household non-abrasive cleaner. If they cannot be cleaned, you can usually replace them for a reasonable price. Make sure to clean up spills in the oven as soon as possible, otherwise they can be stubborn to remove once they are baked onto the oven surface.

Preventative maintenance for your dishwasher starts once you notice your dishes not getting clean. This can be caused by not enough water coming into the appliance, which is caused by a broken or worn out water inlet valve. If you are a do-it-yourselfer, you can easily do this repair. It takes an adjustable wrench, a Phillips screwdriver, and some adjustable pliers. If you don’t use your dishwasher for more than a week at a time it’s a good idea to use some dishwasher cleaner and clean the inside to prevent mold and a stinky dishwasher. You can repair broken and rusty dishwasher racks by using a dishwasher repair kit which includes tine caps and special paint. Clean your dishwasher filter regularly, read your owner’s manual to figure out where your filter is located and for how to remove and clean it. Replace your filter if it is damaged. Clean out the spray arms as well, the small holes in the spray arms over time can become clogged with food bits and other debris. If you notice any glass in the spray arm, there is probably glass in the pump housing too, so you should disassemble the pump to check and clean it.

Preventative maintenance for your automatic defrost refrigerator/freezer should begin with cleaning the coils. This should be done at least once every six months (or more if you have pets). The coils are underneath the refrigerator, they are usually black and look like a series of fins and tubes. You can use a brush specifically made for that job to make it easier. Next, check the door seals to ensure they are sealing properly. Loose door seals are one of the leading causes of your refrigerator running ineffectively. If you notice any tears, cracks, or bumps, you should replace your door seals. Clean out the seals every six months with warm soapy water so they don’t stick to the frame. Check the back wall of the freezer for frost build up, if you do notice any buildup it is a sign that the self-defrosting system has an issue.

Dryer Taking Too Long to Dry Clothes

Clothes dryer is taking a long time to dry clothes? The difference between gas and electric dryers is the way in which the heat is generated. In an electric dryer, AC current flows through a low resistance coil network causing high current flow through the wire coils. Because of the low resistance heater coil, current flow is high so it generates heat. Air from the internal dryer ducting flows through these wire coils to heat the air and a blower wheel, usually attached to the drum motor, pulls the heated air through the dryer drum.

If you look closely in the dryer drum you will see an inlet and an outlet maytag dryer repair pasadena. The intake is usually at the rear of the inside of the drum, commonly described as looking like a cheese grate. This is where your heat comes from. Well, if you have heat coming in, you have to have heat leaving the drum. The heat duct outlet is located either on the inside next to the intake or on the front of the machine at the lint filter. If the outlet is on the inside rear, you’ll see the lint filter located on top panel of the dryer. If your outlet is on the inside front, you’ll see the lint filter in the same location

In a properly working dryer, electric or gas, you will have heated air coming into the drum and you will have one addition to the heated air that leaves the drum – MOISTURE. The heated air from the heat source blends with your clothes and creates moisture in the air. This moisture MUST escape the drum for your clothes to dry properly. I can guess what you’re thinking at this point – “but I always clean the lint filter.” Yes, most of my customers diligently clean their lint filter but ask yourself this – When was the last time you had a professional vent-cleaning company come in to clean your dryer vent? I don’t mean that flexible venting behind your dryer. I mean the vent that goes from the wall behind your dryer that extends to the outside wall or roof of your house. These should be cleaned AT LEAST every 5 years.

Here are some typical problems a clogged or obstructed vent will cause: Blown heater element – coils overheat from low air-flow causing overheat condition which reduces the lifetime of the element. Blown high-limit thermostat and thermal fuse – caused by an overheat condition. If your dryer is still heating properly but not drying clothes than you are in luck, you still can prevent damage to your dryer and avoid a costly repair. Most dryer-repair calls I make are directly related to a restricted or clogged dryer vent.

In conclusion, if your dryer is showing signs of overheat conditions mentioned in this article, call a dryer vent cleaning service – before you call an appliance repair service, Get that vent thoroughly cleaned from the inside wall all the way to the outside dryer vent. If you don’t see an improvement in drying, than call a repairman. Typically, a dryer vent cleaning service should charge between one hundred and a hundred and fifty dollars max.

Three Easy Dishwasher Repair Tips You Can Do Yourself

When a dishwasher quits working or does not work properly, there is panic in the house. The thought of having to do that mountain of dishes by hand makes a housewife or househusband’s blood run cold. Three easy dishwasher repair tips are: check to see that the dishwasher is plugged in, check the use and care manual that came with the dishwasher, and do research in a repair manual from the library or on the Internet.

The first step is to make sure the appliance is plugged properly into the electrical outlet. You wouldn’t believe how many times this is the problem, as simple as it may seem. The second step is to make sure the electrical outlet has electricity. This can be done by plugging another appliance into the outlet, like a handheld electric mixer whirlpool dishwasher repair los angeles.

If there is power to the outlet and the dishwasher does not work, the wiring on the dishwasher should be checked for breaks or burn spots. If there is no power to this source, the electrical panel needs to be checked to make sure that the breaker is turned on or a fuse isn’t blown. An electrical problem may require the services of an electrician.

The appliance users guide has troubleshooting tips that cover common problems. These include normal problems like noise, water standing in the bottom of the tub, water not pumping out, dishes aren’t drying or are not getting clean, and problems with the soap dispenser.

Many times simple repairs suggested in the user’s guide will solve the problem. If the problem involves insufficient or no water, the water valve to the dishwasher needs to be checked to make sure it is turned on and has water.

If the problem has not been resolved, the homeowner can get a repair manual from the library or do research online. At this point, the unit will probably have to be disassembled to repair the problem. A simple issue would be a repair to the door of this dishwasher. A more complicated problem will require removing the appliance from its current location to reach the necessary areas that might need repair.

Once a probable cause has been determined, a part or parts will probably have to be ordered. This requires a payment and a delay while waiting for the part. Once the part or parts arrive, all the manual dishwashers will gather around to offer encouragement and suggestions; this may not be a pleasant experience for the new maintenance person.

A professional repairman will have the tools and the knowledge to handle the repair in a short time. Most of the time no money will be spent until the dishwasher is working again. For the do-it-yourselfer who is successful, repairing a dishwasher is a rewarding experience.